Power Requirements

Raspberry Pi

Over the years I've dbeen playing with Raspberry Pi's ut only recently started to document what I have done or know.

Power Supply, Volts and Amps

 

If you chase around the internet looking for min an max power required for the RaspberryPi you may find various answers and they will conflict. Some say the max voltage for the Pi is 5.25v with and absolute value of 6v when the failsafe will kick in. In fact there are a number of fail safes and the last one is when a diode conducts and hopefully blows and internal fuse before the PI is croaked.

What I have found is the PI5 requires in excess of 5.25v to run. I had two devices on a psu that was set to 5.19 and they both refused to run until I raised the voltage above 5.25v. Now my psu is a little wobbly but it has now been adjusted up to 5.5v but it does wonder up to 5.6 at times. So far no bad result.

Why run a non standard wall wart type? Well that's easy as I have a number of Pi's and they would all need a separate supply but with a large 10A or 20A 5v supply they can all run from one source but you have to change the output voltage as above.


As Root you need to ammend a couple of files "SU" to get root access assuming you have set it up . See other changes for details.

Edit the file to allow max current on USB ports "nano /boot/firmware/config.txt" add the following after arm_Boost=1 entry. "# force high current use USB to allow for using a non PD power supply that can usb_max_current_enable=1" ctrl x to save and exit.

To enable the RPI 5 to use the max current (5A), make sure in "rpi-eeprom-config --edit" that you ensure the next line is present or added if not. "PSU_MAX_CURRENT=5000"